How your speed is calculated
PM5 watts are displayed unchanged. RaceSki uses them with your height, weight, gradient and drafting to calculate virtual ski speed.
Base speed at +2%
The base formula uses watts, weight in kg and height in cm. It is fitted to athlete data at a +2% gradient and contains no reference athlete. Virtual speed is a game model, rather than a measurement of your outdoor ski speed.
Gradient
From −5% to +15%, the same rule adjusts base speed in both directions from +2%. Weight has a small additional effect through this factor. Gradients are limited to the range −15% to +15% in the calculation.
Drafting
The benefit is linear: 10% less required power at 0%, 15% at −5%, 20% at −10%, and no benefit from +10%. It applies only while you are actually in the draft zone. The first 2 metres behind the group leader do not provide draft. Training at +2% offers standard, 2*draft, 3*draft or 4*draft: 8%, 16%, 24% or 32% less required power in the zone. The selected level gives no advantage outside the zone.
Downhill glide
Negative gradients allow gliding without watts. At −5% and shallower, poling can increase speed above the glide speed, with no fixed speed cap. Between −5% and −6%, the model gradually transitions to pure glide. From −6% and steeper, target speed depends only on gradient: 40 km/h at −6%, 60 at −10% and 85 at −15%. Watts, height and weight do not affect this target.
Speed on screen
The formula gives a target speed. Speed on screen approaches it gradually through acceleration and braking. Steeper descents increase acceleration. Draft can help you reach glide speed sooner, but does not increase the target during pure glide. At 0 watts on flat terrain, you brake to a stop.
Show the formula
W = PM5 watts, m = weight in kg, h = height in cm, g = gradient in percentage points (2 means +2%). B = base speed at +2%, H = gradient factor, C = glide speed. d = 1 in the draft zone, otherwise 0. k = selected draft level 1–4 in training at +2%, otherwise 1.
The formula below applies from −5% to +15%. When W = 0, B = 0. C = 0 on flat or uphill terrain.
Target speed in km/h = max(C(g), B × H × (1 − d × k × D(g))^(−1/3)) B = 55.55765 × W^(1/3) × m^0.09238837 / h^0.64883396 H = exp(−(0.0565 + 0.00005 × m) × (g − 2)) D(g) = max(0, 0.1 − 0.01 × g)
Glide and the transition from −5% to −6%
C(g) = 40 × (−g / 6)^q q = log(28 / 40) / log(5 / 6) (−6 < g < 0)
For −6 < g < −5: t = −g − 5. Use P(−5) for powered speed at −5%, with draft benefit D(g) from the current gradient. Target speed = max(C(g), (1 − t) × P(−5) + 40 × t). From −6% and steeper: target speed = 35 + 5 × min(10, −5 − g).
Glide speed without poling
| Gradient | Glide at 0 W · km/h |
|---|---|
| -15% | 85 |
| -10% | 60 |
| -6% | 40 |
| -5% | 28 |